Used for trips to the local summits.
From left to right: Folding stool, 2200mAh LiPo battery in a ’safe bag‘, throw bag (250g), 30m Nylon rope (3mm) , 2 x 10m Nylon rope (3mm) with tent pegs, KX3 with Palm Pico Paddle (on the KX3-Go-Box), 40m- and 30m- wire-dipole (w/o BALUN), 20m end-fed dipole, plywood board (serves as table), headlight, tape, writing board with log sheet, pencil, KX3 power cable with Power Pole plug, headphones, angle adapter BNC – UHF, Army knife, RG223 (20m), velcro straps, 3 x 10m guy rope with tent pegs, 10m fiberglass telescopic pole (67cm long), support plate 22mm (black, for guy wires), support plate 8mm with pulley block (blue, for antenna), 2 lashing belts.
As the trips are usually not tiring I don’t optimize the weight of the equipment more than necessary. I prefer a minimum of comfort (folding stool and plywood board) and the choice between several antennas and options to set them up: In a tree with throw bag and rope or on the fiberglass pole which can either be attached to a fence post or secured with guy- ropes.
The monoband antennas have been replaced with a linked dipole in the meantime. However, a further optimized antenna (End Fed Half Wave Dipole with Traps) is already under construction.